Having questions that not on the list? Send us a message!

Are Seamless Gutters worth it ?
Seamless Gutters Cost, However, many homeowners believe that the high seamless gutters cost is worth it because seamless gutters are easier to maintain. Investing in seamless gutters can also increase the overall value of your home and give your roof the ventilation it needs to safeguard from rot and shingle damage.
How much does leaf guard gutters cost ?
Gutter guards and covers typically cost between $7.50 and $10 per lineal foot installed. Given that the average home has about 200 feet of gutter, many homeowners can expect to pay about $1,500 to $2,000 for professionally installed gutter guards. The price goes up from there for more complex gutter guard systems.
Which is better aluminum or steel gutters ?
Both aluminum and steel gutters resist rust. However, aluminum resists it slightly better than galvanized steel. This is due in part to the fact that the steel is coated in a thin layer of zinc to prevent rusting. If not repaired, the scratches can lead to rust over time, which can damage the integrity of the gutters.
What are roof gutters for ?
Water collected by a rain gutter is fed, usually via a downpipe (also called a leader or conductor), from the roof edge to the base of the building where it is either discharged or collected.
How often do you have to clean your gutters ?
Many experts recommend cleaning your gutters at least twice a year– once in the late spring and once in the late summer/early fall. But there are a few factors that might make you reconsider. If you have pine trees growing above your house, consider inspecting your gutters every 3 months.
How many downspouts do I need ?
How Many Downspouts Do I Need ? A general rule of thumb is one downspout per 20 feet of guttering, but more may be necessary depending on the local weather, the size of the drainage area and the design of the gutter system.
How deep should you bury gutter drains ?
Dig the Trench. Begin digging the trench and dumping the dirt onto the cardboard. This is a trick that can make backfilling go much more smoothly later. The trench should be at least 6-inches-wide and slope down slightly (1 to 2 inches per length of pipe) so water drains away from the downspouts.
How do you build a backyard French drain ?
Dig the trench. Digging the trench is the least complicated step in building a French drain, but it is the most labor intensive ! 2) Line the trench with landscape fabric. 3) Add the gravel. 4) Lay the pipe. 5) Cover the pipe. 6) Fill in the trench.
How long do vinyl gutters last ?
Vinyl has a relatively short lifespan. If you live in a moderate climate and properly care for the material, then it can last up to 20 years. If you aren't careful, then the vinyl can last less than 10 years. These gutters have a tendency to bend from heavy rain or snow.
How deep should a dry well be ?
Dig the Hole and Trench. Coming out from the downspout, at least 10 feet from the foundation (and 3 feet from any property line), dig a hole about 4 feet deep and wide. With a long-handled shovel, tunnel under the sidewalk and dig a trench 1 foot deep and 6 inches wide that slopes gradually toward the hole.
Which is better aluminum or steel gutters ?
Both aluminum and steel gutters resist rust. However, aluminum resists it slightly better than galvanized steel. This is due in part to the fact that the steel is coated in a thin layer of zinc to prevent rusting. If not repaired, the scratches can lead to rust over time, which can damage the integrity of the gutters.
What is K style gutter ?
The outer shape of the gutter is supposed to (very vaguely) represent the letter K, as opposed to a perfectly-rounded, half-circle-shaped gutter. In other words, the outer edge consists of a short, straight line from the bottom of the gutter, then two opposing curves, followed by another short straight line.
Are gutters aluminum ?
Aluminum is the industry standard in seamless gutters and is used in almost all Coast to Coast gutter installations. Aluminum is consistent and reliable, and very inexpensive. ... As for seamless gutters, there are two qualities of the metal – primary and secondary.
How do you replace gutters ?
1) Locate downspouts in unobstructed areas where water can be directed away from the house. 2) Place downspouts in inconspicuous locations if possible. 3) Install oversized 3 x 4-in. 4) Slope long gutter runs (40 ft. or more) down both directions from the middle and put a downspout on each end. 5) What is the standard size of gutters ? 6) Most residential rain gutters come in two sizes, 5 inch and 6 inch, and are made of either aluminum, galvanized steel or copper in a standard "K" style. The typical 5 inch K-style gutter comes with 2-inch x 3-inch downspouts.
Are gutters required by code ?
Section R801.3 of the IRC does not pertain to buildings constructed on slab-on-grade foundations. Therefore a guttering system is not required. While gutters are not a code requirement, they very well may benefit the builder in certain circumstances in achieving positive site drainage.
How do you install a drip edge on a roof ?
Install roof drip edge along the eaves, add underlayment, then place drip edge along the gable end. The best way is to install the roof drip edge only along the eaves first, then place ice-and-water barrier (in the snowbelt) or felt paper (underlayment) over the drip edge.
What galvanized gutters ?
Galvanized. Comparing aluminum and galvanized steel rain gutters is easy, but contrasting them is a nightmare. They are often considered two sides of the same coin because they are nearly the same price; both resist rust, are quite durable and last a long time.
How much is leaf guard gutters ?
Installing gutter guards on an average sized home costs $1,200. The price ranges from $240 to install inexpensive covers yourself to $6,000 at the high end for professional installation. The price of the material runs from $1.20 per foot to $10per foot. On average, they are between $600 and $1,800.

To Schedule Your Free Estimate